RF5373 Datasheet, PDF (5/13 Pages) RF Micro Devices – 1.8V TO 3.6V IEEE802.11b/g/n AND BLUETOOTH DRIVER/AMPLIFIER

RF5373
Pin
1
2
3
4
5
6
7
8
Pkg
Gnd
Function
RF IN
N/C
VREG
PDETECT
or NC*
RF OUT
N/C
VCC
N/C
GND
Description
Interface Schematic
RF input pin. See evaluation board schematic for details.
No Connect, this pin may be left as a no connect or connected to ground.
Bias current control voltage for the first and second stages.
Provides an output voltage proportional to the output RF level.
*In applications where the P_DETECT is not desired, this pin may be left
unconnected.
RF output.
No Connect, this pin may be left as a no connect or connected to ground.
Power supply for both the first and second stage. Connect as shown on the
evaluation board schematic.
N _{No Connect, this pin may be left as a no connect or connected to ground.}
Ground connection for the device “die flag”. The backside of the package
IG ^{should be soldered to a top side ground pad which is connected to the PC}
Package Drawing _DES ^{board ground plane through multiple vias.}
NEW
NOT ^FOR
DS110618
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
5 of 13