RF5373 Datasheet, PDF (4/13 Pages) RF Micro Devices – 1.8V TO 3.6V IEEE802.11b/g/n AND BLUETOOTH DRIVER/AMPLIFIER

RF5373
Parameter
Specification
Unit
Min.
Typ.
Max.
Condition
Bluetooth Class 1
Nominal conditions: V_CC=3.1V, V_REG=1.75V,
Freq=2.45GHz, Temp=+25°C, unless other-
wise specified.
Frequency
2.4
2.5
GHz
Output Power BT version 1.2
19
dBm
Meeting Class 1 Bluetooth version 1.2 specifi-
cation
Output Power BT version 2.0
Large Signal Gain
Second Harmonic
Operating Current
Idle Current
I_REG Current
Shutdown Current
Power Supply
V_CC Supply Voltage
25
1.8
16
28
65
45
5.5
3.1
-27
10
3.6
dB
dBm
mA
mA
mA
A
V
Meeting Class 1 Bluetooth version 2.0 specifi-
cation
Measured at rated output power; nominal con-
N ^ditions
Fundamental frequency is between 2400MHz
to 2500MHz (RFP_OUT=+16dBm), see note 2
IG ^{POUT=16dBm at nominal conditions}
DES ^{At nominal conditions with no RF}
V_REG Voltage
1.6
1.75
1.85
V
Note 1: The PA must operate with gated bias at 1% to 99% duty cycles without any EVM or other parameter degradation with R1=56.
NEW ^{Note 2: For best harmonic rejection please refer to the harmonic rejection application schematic.}
NOT ^FOR
4 of 13
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS110618