RF5163_1 Datasheet, PDF (5/14 Pages) RF Micro Devices – 3V-5V, 2.5GHZ LINEAR POWER AMPLIFIER

RF5163
The RF5163 has primarily been characterized with a voltage on V_REG1 and V_REG2 of +3.0V_DC. However, the RF5163 will operate
from a wide range of control voltages. If a different control voltage is desired, contact RFMD Sales or Applications Engineering
for additional data and guidance.
RF5163PCBA-WD Evaluation Board:
The RF5163PCBA-WD Evaluation Board was developed to assist prospective customers of the RF5163 with a completely char-
acterized medium to high power amplifier solution incorporating a highly linear driver amplifier stage. In applications requiring
more than 20dB to 22dB amplifier stage gain, the RF5163PCBA-WD Evaluation Board design may be employed to achieve
higher gain combined with ultra linear RF power output for high peak-to-average power ratio applications (e.g., orthogonal fre-
quency division multiplex (OFDM) modulation).
Package Drawing
2 PLCS
-A-
0.10 C A
4.00 SQ.
2.00 TYP
0.70
0.65
0.10 C B
2 PLCS
0.10 C B
2 PLCS
-B-
1.87 TYP
12°
MAX
-C-
0.10 C A
2 PLCS
3.75 SQ
0.60
0.24
TYP
Shaded lead is pin 1.
Dimensions in mm.
0.35
0.23
0.10 M C A B
Pin 1 ID
0.20 R
0.05 C
0.90
0.85
0.05
0.00
SEATING
PLANE
2.25
1.95
SQ.
0.75 _TYP
0.50
0.65
Rev A12 DS061114
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
5 of 14