CGR-0218Z Datasheet, PDF (5/8 Pages) RF Micro Devices – PUSH-PULL 5MHz to 210MHz HIGH LINEARITY InGaP HBT AMPLIFIER

CGR-0218Z
Pin
1
2, 3,
6, 7
4
5
8
EPAD
Function
RF IN
GND
Description
RF input pin. External DC blocking capacitor is required.
Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as
possible.
RF IN
RF OUT/VCC
RF OUT/VCC
GND
Same as pin 1.
RF output and bias pin (open collector).
Same as pin 5.
Exposed area on the bottom side of the package must be soldered to the ground plane of the board for optimum
thermal and RF performance. Several vias should be located under the EPAD as shown in the recommended
land pattern.
Pin Out
Amplifier Configuration
1
8
2
7
3
6
4
5
DS091015
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
5 of 8