English
Language : 

RFSW6232 Datasheet, PDF (4/9 Pages) RF Micro Devices – General Purpose Differential 3T Switch
RFSW6232
Parameter
Specification
Unit
Min Typ Max
Condition
2500MHz Specifications –
Continued
Input IP3 – UMTS Mode
Return Loss (P1, P2, P3)
DC Control and Electrical
Specifications
VDD Supply Current
CTL1, CTL2 – Control Voltage High
CTL1, CTL2 – Control Voltage Low
Control Current
Switching Speed
65 70
dBm
Nominal Conditions Unless Otherwise Stated, VDD = 2.7V,
VHIGH / VLOW = 1.8V / 0V, Temp = 25°C, 50Ω, Single-ended
PIN = 20dBm, 2500MHz
24.7
dB 2500MHz
Nominal Conditions Unless Otherwise Stated, VDD = 2.7V,
VHIGH / VLOW = 1.8V / 0V, Temp = 25°C, 50Ω, Single-ended
50 75 100 µA S1, S2 or S3 Mode active
1.3
2.7
V
0
0.45 V
1
µA
3
5
µs
10% to 90% RF
Notes:
1.
2.
The DP3T switch is controlled by CTL1, CTL2. The poles are synchronized such that each is connected to the same port number.
Operation of switch may be delayed up to 100 microseconds after initial application of VDD supply, under extreme cold conditions.
Mode Control Table
Mode
P1A – PCA
P1B – PCB
P2A – PCA
P2B – PCB
P3A – PCA
P3B – PCB
PCA – PCB (High Isolation)
CTL1
High
Low
Low
High
CTL2
Low
Low
High
High
Note: HI mode connects a termination across PCA-PCB and disconnects P1, P2 and P3 paths.
Test Condition
S1
S2
S3
HI
Low Frequency Linearity Table
Frequency
2.5MHz
IP3
55dBm
IP2
74dBm
5MHz
57dBm
80dBM
25MHz
64dBm
86dBm
50MHz
67dBm
90dBm
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150623
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 9