RFSW6232 Datasheet, PDF (3/9 Pages) RF Micro Devices – General Purpose Differential 3T Switch

RFSW6232
Parameter
Specification
Unit
Min Typ Max
Condition
900MHz Specifications –
Continued
Input IP2
Input IP3
110 120
65 70
Nominal Conditions Unless Otherwise Stated, V_DD = 2.7V,
V_HIGH / V_LOW = 1.8V / 0V, Temp = 25°C, 50Ω, Single-ended
dBm
dBm
PIN = 20dBm
Return Loss (P1, P2, P3)
24.7
dB 900MHz; Active to PC
2000MHz Specifications
Frequency
2000
Nominal Conditions Unless Otherwise Stated, VDD = 2.7V,
VHIGH / VLOW = 1.8V / 0V, Temp = 25°C, 50Ω, Single-ended
MHz
Insertion Loss (P1, P2 or P3 to PC)
0.42 0.5 dB 2GHz; S1, S2 or S3 Active
Isolation
P1 to P2 or P3 20 22.5
dB 2GHz; S1, S2 or S3 Active
P1, P2 or P3 to PC 20 22.5
dB 2GHz; HI Mode Active
Harmonics
P1, P2 or P3 to PC, 2F0 -85
P1, P2 or P3 to PC, 3F0 -85
P1, P2 or P3 to PC -85
Input IP2
110
Input IP3
65
-104
-98
-103
120
70
dBc
dBc 2GHz
dBc
dBm
dBm
PIN = 20dBm, 2GHz
Return Loss
P1A, P2A, P3A
20.9
P1B, P2B, P3B
20.9
dB
2GHz
dB
Phase Balance (P1, P2, or P3–
PC)
-3
1.4
+3
Deg Test at 1980MHz
2500MHz Specifications
Frequency
2500
Nominal Conditions Unless Otherwise Stated, VDD = 2.7V,
VHIGH / VLOW = 1.8V / 0V, Temp = 25°C, 50Ω, Single-ended
MHz
Insertion Loss (P1, P2 or P3 to PC)
Isolation
0.45 0.55 dB 2500MHz; S1, S2 or S3 Active
P1 to P2 or P3 16 20.7
P1, P2 or P3 to PCA 16 21
Harmonics
dB 2500MHz; S1, S2 or S3 Active
dB 2500MHz; HI Mode Active
P1, P2 or P3 to PC, 2F0 -85 -98
P1, P2 or P3 to PC, 3F0 -85 -102
P1, P2 or P3 to PC, up to
12.75GHz
-85
-103
Input IP2 – UMTS Mode
110 115
dBc
dBc _2500MHz
dBc
dBm PIN = 20dBm, 2500MHz
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150623
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 9