RFSW8006Q Datasheet, PDF (3/6 Pages) RF Micro Devices – Symmetric SP3T Switch

RFSW8006Q
Parameter
General Parameters
Passband Ripple
IP0.1dB; CW
Switch Total Current (IDD)
Switch Control Current; High State
Switch Control Current; Low State
Switch Time, 50% CTL to 90% RF
Switch Time, 50% CTL to 10% RF
300MHz to 450MHz Operation
Insertion Loss
Input Return Loss
Output Return Loss
Specification
Min Typ Max
-0.2
0.2
25 27
26 28
50 100
0.5 1.5
0.05 0.1
150 500
150 500
0.4
0.4 0.5
20 15
20 15
Unit
dB
dBm
dBm
uA
uA
uA
ns
ns
dB
dB
dB
dB
Condition
All Modes = CRF1 or CRF2 or CRF3; T = -40°C to 105°C;
Unless otherwise noted
All Modes; VDD = 2.7V; CW
All Modes; VDD ≥ 3.6V; CW
All Modes; VDD 2.7-4.8V; Control voltage 1.2 to 4.8V; T = 25°C
All Modes; Control voltage 1.2 to 4.8V; T = 25°C
All Modes; Control voltage ≤ 0.2V; T = 25°C
All Modes; Switch Control = 1.2V to 4.8V
VDD = 3.6V; CRF1 = 1.2V to 4.8V; T = -40°C to 105°C;
Unless otherwise noted
T = 25°C
Switch Control Logic Table
Mode
CRF1
RF1
1
RF2
0
RF3
0
CRF2
0
1
0
CRF3
0
0
1
Condition
RF1 to ANT
RF2 to ANT
RF3 to ANT
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS150129
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 6