RFSA3013 Datasheet, PDF (3/17 Pages) RF Micro Devices – 75 VOLTAGE CONTROLLED ATTENUATOR

RFSA3013
Parameter
Specification
Unit
Min. Typ. Max.
Condition
Control con’t
Voltage Control Pin Current (MODE high)
37
A VC Pin at 5V
Voltage Control Pin Current (MODE low)
24
A VC Pin at 3.3V
MODE Pin Logic Low
0.4
V
MODE Pin Logic High
1
V
Settling Time
15
sec 1dB attenuation change settling within
0.1dB
Note: Typical performance at nominal conditions unless otherwise noted: Supply voltage = 5.0V, Operating temperature = 25°C, RF Frequency
1GHz
DS120419
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
3 of 17