RFPA2016 Datasheet, PDF (3/25 Pages) RF Micro Devices – 3-Stage Power Amplifier, 1W 700MHz to 2700MHz

RFPA2016
Parameter
Output Return Loss
Noise Figure
2.11GHz to 2.17GHz
Frequency
Input Power
Gain
ACPR
P1dB
Output IP3
Detector Output Voltage
Input Return Loss
Output Return Loss
Noise Figure
2.62GHz to 2.69GHz
Frequency
Input Power
Gain
ACPR
P1dB
Output IP3
Detector Output Voltage
Input Return Loss
Output Return Loss
Noise Figure
Power Supply
Amp1 Quiescent Current
Amp2 Quiescent Current
Amp3 Quiescent Current
VBIAS
Enable Voltage High (VPC_EN)
Enable Voltage Low (VPC_EN)
Specification
Unit
Min Typ Max
Condition
12
dB
3.4
dB
VCC = 5.0V, Temp = 25°C, Optimized for -45dBc ACPR
at rated power
2.14
GHz
0 dBm Max recommended continuous input power, V_CC = 5.0V, Load VSWR = 2:1
32 36 40 dB
-48 -43 dBc RF output power = 21dBm, WCDMA 3GPP 3.5, test model 1, 64 DPCH
31.4
dBm
41
dBm 18dBm per tone, 1MHz spacing, optimized for best ACPR
0.8
V CW RF output power = 21dBm with 0.2pF coupling capacitor
20
dB
14
dB
5.3
dB
VCC = 5.0V, Temp = 25°C, Optimized for -45dBc ACPR
at rated power
2.65
GHz
0 dBm Max recommended continuous input power, V_CC = 5.0V, Load VSWR = 2:1
34
dB
-47
dBc RF output power = 21dBm, WCDMA 3GPP 3.5, test model 1, 64 DPCH
31
dBm
40.5
dBm 18dBm per tone, 1MHz spacing, optimized for best ACPR
0.9
V CW RF output power = 21dBm with 0.2pF coupling capacitor
20
dB
11
dB
5.3
dB
VCC = 5.0V, 2140MHz bias conditions
30
40
50
mA _{At VCC1 = VBIAS = 5V, VPC_EN = 1.8V, off for 750MHz band}
55
75
90
mA _{At VCC2 = VBIAS = 5V, VPC_EN = 1.8V}
155 190 240 mA At V_CC3 = V_BIAS = 5V, VPC_EN = 1.8V
4.75 5 5.25 V V_BIAS = V_CC under normal operating conditions
1.6 2.5 5.25 V Normal operation
0
0.8
V Module shutdown
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140317
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 25