RFPA2016 Datasheet, PDF (2/25 Pages) RF Micro Devices – 3-Stage Power Amplifier, 1W 700MHz to 2700MHz

Absolute Maximum Ratings¹
Parameter
Supply Voltage (VCC, VBIAS, VEN )
Amp1 DC Current (ICC1)
Amp2 DC Current (ICC2)
Amp3 DC Current (ICC3)
CW Input Power, 50Ω, 2-Stage Operation
CW Input Power, 50Ω, 3-Stage Operation
Modulated (WCDMA) Input Power, 6:1 output VSWR, 2-Stage Operation
Modulated (WCDMA) Input Power, 6:1 output VSWR, 3-Stage Operation
Storage Temperature Range
ESD Rating - Human Body Model (HBM)
Moisture Sensitivity Level
Notes:
1. The maximum ratings must all be met simultaneously
Rating
6.0
100
250
800
1
18
-6
7
-40 to +150
Class 1A
MSL3
Unit
V
mA
mA
mA
dBm
dBm
dBm
dBm
°C
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of antimony
trioxide in polymeric materials and red
phosphorus as a flame retardant, and
<2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Recommended Operating Condition
Parameter
Specification
Operating Temperature Range
Operating Junction Temperature (TJ)^{1& 2}
Collector Voltage (VCC1, VCC2, VCC3,)³
Min Typ Max
-40
+85
165
2.7
5
5.25
Notes:
1.
2.
3.
TJ for 1e6 hours MTTF, CW Operation
TJ = TL + PDISS * RTH
Max recommended operational collector voltage
Unit
°C
°C
V
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
Condition
728MHz to 768MHz
VCC = 5.0V, Temp = 25°C, Optimized for -45dBc ACPR
at rated power
Frequency
Input Power
Gain
ACPR
P1dB
Output IP3
Detector Output Voltage
Input Return Loss
748
MHz
-2 dBm Max recommended continuous input power, V_CC = 5.0V, Load VSWR = 2:1
35
dB Stage 1 bypassed
-48
dBc RF output power = 21dBm, WCDMA 3GPP 3.5, test model 1, 64 DPCH
31.5
dBm
40
dBm 18dBm per tone, 1MHz spacing, optimized for best ACPR
0.85
V CW RF output power = 21dBm with 0.3pF coupling capacitor
20
dB
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140317
RF MICRO DEVICES^® and RFMD^® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
2 of 25