RFFM6404 Datasheet, PDF (3/8 Pages) RF Micro Devices – 2.5V to 4.5V, ISM Band, 27.5dBm, 430MHz to 450MHz Transmit/Receive Module

RFFM6404
Parameter
PA PAE
Input Return Loss
Output Return Loss
Receive Mode
Gain
Noise Figure
IP1dB
IIP3
Operating Current
Input Return Loss
Output Return Loss
Receive Bypass Mode
Insertion Loss
IP1dB
IIP3
VccTX Supply Current
VccRx Supply Current
Input Return Loss
Output Return Loss
Antenna Switch
Insertion Loss
IP1dB
IIP3
Input Return Loss
Output Return Loss
Isolation
Isolation
Logic
Control Logic HIGH
Control Logic LOW
Control Logic HIGH Current
Control Logic LOW Current
VAPC HIGH Current
Specification
Min Typ Max
TBD
9
7
14.0 15.5 18.0
1.7 1.9 2.5
-6.0 -3.5
3
4.0 5.0 8.0
10
10
2
5
21.0 22.5
44 47
370 500
70 200
8
8
0.5
33
54
17
17
Unit
%
dB
dB
dB
dB
dBm
dBm
mA
dB
dB
dB
dBm
dBm
µA
µA
dB
dB
dB
dB
dB
dB
dB
Condition
VCCTX=4.2V, POUT=29.5dBm (excludes losses of module filter and switches)
Measured Path: SAW2 to RX, VCCTX=4.2V, VCCRX=4.2V,
VAPC=0.0V, EN=1.8V, TR=0.2V, BYP=0.2V, Temperature=25ºC
Measured Path: SAW2 to RX, VCCTX=4.2V, VCCRX=4.2V,
VAPC=0.0V, EN=1.8V, TR=0.2V, BYP=1.8V, Temperature=25ºC
1MHz Spacing
Measured Path: ANT to SAW1, RX & RX Bypass Modes
30
dB ANT to SAW1, Transmit High Power Mode
EN, TR, BYP
1.6
4.3
V Max Control Logic High = VCCTX/VCCRX - 0.2VDC
0.2 0.3
V
10 500 nA
0.1
µA
50 100 µA Across all rated voltages at rated power
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140721
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 8