RFFM6404 Datasheet, PDF (2/8 Pages) RF Micro Devices – 2.5V to 4.5V, ISM Band, 27.5dBm, 430MHz to 450MHz Transmit/Receive Module

RFFM6404
Absolute Maximum Ratings
Parameter
Voltage
Storage Temperature Range
Operating Temperature Range
Receive RF Input Power (SAW2)
Transmit RF Input Power (PA Enabled)
Receive RF Input Power (ANT)
T/R Port Load VSWR in Transmit Mode
ESD, HBM
ESD, CDM
Moisture Sensitivity Level
Rating
5.25
-40 to +150
-40 to +85
+25
+15
+33
10:1
500
1000
MSL3
Unit
V
°C
°C
dBm
dBm
dBm
V
V
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Parameter
Frequency
RF Port Impedance
Operating Voltage
VAPC (Tx Output Power Control)
Leakage Current
Total FEM Leakage Current
Transmit High Power Mode
Gain
Output Power
Output Power Variation
Output P3dB
Operating Current
Quiescent Current
Second Harmonic
Third – Fourth Harmonic
Fifth – Tenth Harmonic
Module PAE
Specification
Min Typ Max
430
450
50
2.5 4.2 4.5
0.0 2.7 3.0
0.1 1.0
25.5 26.5
21.5 22.5
29.5
27.5
24.5 25.5
-0.4
-0.4
29
350
450 600
100
-30
-50
-40
-60
-60
-60
45
Unit
MHz
Ω
V
V
µA
dB
dB
dBm
dBm
dBm
dB
dBm
mA
mA
mA
dBc
dBc
dBc
dBc
dBc
dBc
%
Condition
VCCTX & VCCRX
VAPC operates such that the transmitter output power is saturated at a level
lower than 1.9V and minimal variation in output power of the device occurs
above that level
RF:Off, VCCTX=4.2V, VCCRX=4.2V,
VAPC=0.0V, EN=0.0V, TR=0.0V, BYP=0.0V, Temperature=25ºC
ICCTX + ICCRX
Measured Path: TX to ANT, VCCTX=4.2V, VCCRX=4.2V,
VAPC=2.7V, EN=1.8V, TR=1.8V, BYP=0.2V, Temperature=25ºC
VCCTX=4.2V, PIN=+3dBm
VCCTX=2.7V, PIN=+3dBm
VCCTX=4.2V, PIN=+3dBm
VCCTX=3.6V, PIN=+3dBm
VCCTX=2.7V, PIN=+3dBm
VCCTX=4.2V, PIN=+3dBm, Over frequency and control voltage
VCCTX=4.2V
VCCTX=4.2V, POUT=27.5dBm, ICCTX
VCCTX=4.2V, PIN =+3dBm, ICCTX
ICCTX, RF = Off
POUT=27.5dBm
POUT=27.5dBm, with harmonic filter
POUT=27.5dBm
POUT=27.5dBm, with harmonic filter
POUT=27.5dBm
POUT=27.5dBm, with harmonic filter
VCCTX=4.2V, POUT=29.5dBm (takes into account filter and switches)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140721
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 8