RFFM6201 Datasheet, PDF (3/9 Pages) RF Micro Devices – 2.0V TO 3.6V, 2.4GHZ FRONT END MODULE

RFFM6201
Parameter
Tx Path (continued)
2nd harmonic level
3rd harmonic level
4rd harmonic level
5th harmonic level
VSWR Stability and load mismatch
susceptibility
VSWR No damage
Gain settling time
Amplitude imbalance
Phase imbalance
Specification
Min. Typ. Max.
-45
-42
-45
-42
-45
-42
-45
-42
4:1
8:1
1
10
-1
1
-15
15
Rx Path to LNA Mode
Frequency
Gain
Noise Figure
Current
IIP3
Gain flatness
Input return loss
Output return loss
Balanced output impedance
Amplitude imbalance
Phase imbalance
Rx Path to Bypass Mode
Frequency
In-band attenuation/noise figure
Current
IIP3
Gain flatness
Input return loss
Output return loss
Amplitude imbalance
Phase imbalance
Maximum input power
Antenna Switch
RF-to-Control Isolation
RF-to-ANT Isolation
RF-to-RF Isolation
T/R switching time
Logic
Logic Level "High"
Logic Level "Low"
Input Source Current Logic Level
"High"
Input Source Current Logic Level
"Low"
2405
8
9
3
3.2
5
4
8
-0.3
12
15
12
100
-1
-15
2405
6
200
17
25
-0.5
18
10
-1
-15
10
50
17
20
18
20
V_BATT - 0.3
0
V_BATT - 0.2
100
2480
0.3
1
15
2480
0.5
1
15
1
V_BATT
0.2
130
1
Unit
Condition
dBm/MHz
dBm/MHz
dBm/MHz
dBm/MHz
At rated power, 802.15.4 OQPSK, all conditions
At rated power, 802.15.4 OQPSK, all conditions
At rated power, 802.15.4 OQPSK, all conditions
At rated power, 802.15.4 OQPSK, all conditions
μS
dB
deg
MHz
dB
dB
mA
dBm
dB
dB
dB
Ω
dB
deg
Nominal Conditions: T= 25°C, V_BATT= 3.3,
Control Voltage= V_BATT -0.2V unles otherwise noted
Nominal Conditions
Across all voltage and temperature conditions
Pins 5, 6 (RFN, RFP) 100Ω differential
MHz
dB
SW 1dB, Bypass 3.5dB, Balun 1.5dB
μA
dBm Across all voltage and temperature conditions
dB
dB
dB
Pins 5, 6 (RFN, RFP) 100Ω differential
dB
deg
dBm
dB
dB
dB
μS
V
V
μA
μA
DS130327
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
3 of 9