RFFM6201 Datasheet, PDF (2/9 Pages) RF Micro Devices – 2.0V TO 3.6V, 2.4GHZ FRONT END MODULE

RFFM6201
Absolute Maximum Ratings
Parameter
DC Supply Voltage
DC Supply Current
Maximum Tx Input Power
Maximum Rx Input Power
Operating Case Temperature
Storage Temperature
ESD HBM per ESDA/Jedec-JDS-001
ESD CDM per JESD22-C101
MSL
Rating
5.0
300
+5
+5
-40 to +85
-40 to +150
1000
1000
MSL3
Unit
V
mA
dBm
dBm
°C
°C
V
V
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2011/65/EU, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Conditions
V_BATT
Operating Temperature Range
Z_O
Off mode current (All controls
LOW)
Current sourced through CT pin
Voltage drop from CT pin to
RFN/RFP
Tx Path
Frequency
Input Return Loss
Balanced input impedance
Amplitude Imbalance
Phase Imbalance
Output Return Loss
Transmit Path Gain
Transmit Path Gain
Gain flatness
Rated Output Power
Supply current
Thermal Resistance
Specification
Min. Typ. Max.
2
3.3
3.6
-40
25
85
50
0.5
1
18
0.1
2405
2480
15
100
-1
1
-15
15
10
22
25
15.5
24
-0.3
0.3
23
22
20
18
170
200
180
220
88
Unit
Condition
Specifications must be met across supply voltage,
control voltage, and temperature ranges unless other-
wise specified.
V
°C
Ω
μA
All logic low, Temp= 25°C; Over Voltage
mA
V
MHz
dB
Ω
dB
deg
dB
dB
dB
dB
dBm
dBm
dBm
mA
mA
°C/W
Nominal Conditions: T= 25°C, V_BATT= 3.3, Control
Voltage= V_BATT -0.2V unles otherwise noted
Pins 5, 6 (RFN, RFP) 100Ω differential
At rated power, nominal conditions
At rated power, 3.3V to 3.6V, all temperatures
At rated power, nominal conditions
V_BATT=3.6V, all conditions
V_BATT=3.0V, all conditions
V_BATT to 2.7V, all temperatures
V_BATT to 2.0V, all temperatures
At rated power, nominal conditions (V_BATT=3.3V,
25°C), 802.15.4 OQPSK
At rated power, 3.0V to 3.6V, all temperatures,
802.15.4 OQPSK
3.6V_CC; P_OUT = 23dBm; Tref = 85°C
2 of 9
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS130327