RF6599 Datasheet, PDF (3/9 Pages) RF Micro Devices – 915MHz Transmit/Receive Module

RF6599
Parameter
Rx Path
Frequency Range
Insertion Loss
Input IP3
Input Return Loss
Output Return Loss
Current
ANT1
Power Down Mode, ANT2
Antenna Switch and Logic
Isolation
Logic Voltage High
Logic Voltage Low
Logic Current, High
Specification
Unit
Min Typ Max
902 915 928 MHz
1 1.3 dB
12 18
dBm
10
dB
10
dB
Condition
VCC = 3.6V, TXRX_SEL = Low, ANT_SEL = High or Low,
VREG = High
80
mA ANT_SEL = High, VREG = Low, TXRX_Sel = Low
1.2
mA ANT_SEL = Low, VREG = Low, TXRX_Sel = Low
20
dB Any used port to any unused port
3.1 3.4 3.8
V All Logic I/O’s, VCC to 0.2V
0 0.2
V All Logic I/O’s
85 120 mA All Logic I/O’s
Module Logic Truth Table
Operating Mode
TX - ANT1
TX - ANT2
RX - ANT1
RX - ANT2
ANT_SEL
HIGH
LOW
HIGH
LOW
TXRX_SEL
HIGH
HIGH
LOW
LOW
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140130
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 9