RF6599 Datasheet, PDF (2/9 Pages) RF Micro Devices – 915MHz Transmit/Receive Module

RF6599
Absolute Maximum Ratings
Parameter
Battery Voltage
RF Port Impedance
Operating Temperature
Storage Temperature
ESD, HBM (RF pins)
ESD, HBM (All pins)
ESD, CDN (RF pins)
ESD, CDM (all pins)
MSL
Maximum Input Power to PA*
*Maximum Input Power with a 50Ω Load
Rating
5
50
-30 to 70
-40 to 85
500
500
500
500
MSL 3
+20
Unit
V
W
°C
°C
V
V
V
V
dBm
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of antimony
trioxide in polymeric materials and red
phosphorus as a flame retardant, and
<2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
Condition
Power Amplifier
Frequency Range
CW Output Power
Large Signal Gain, Min Supply
Voltage
Large Signal Gain, Typ Supply
Voltage
Large Signal Gain, Max Supply
Voltage
Output Harmonic Levels
2nd
3rd through 10th
Input Return Loss
Power Supply Voltage
VCC
VREG
Current
Operating VCC
Operating VREG
Tx Idle Current
Module Leakage
VCC = 3.6V, TXRX_SEL = High, ANT_SEL = High or Low,
VREG = High, Temperature = 25°C
902 915 928 MHz
25.5 26
dBm
15.0 16.0
dB VCC = 3.3V, Temperature = -30°C
13.0 15.5
dB VCC = 3.3V, Temperature = 25°C
10.5 15.0
17.0 18.0
dB VCC = 3.3V, Temperature = 70°C
dB ^{VCC = 3.6V, Temperature = -30°C}
16.5 17.0
dB VCC = 3.6V, Temperature = 25°C
15.0 16.5
18.5 19.0
dB VCC = 3.6V, Temperature = 70°C
dB ^{VCC = 4.0V, Temperature = -30°C}
17.0 18.0
dB VCC = 4.0V, Temperature = 25°C
16.0 17.0
dB VCC = 4.0V, Temperature = 70°C
-30
dBc
-67
dBc
10
dB
3.3 3.6 4
3.1 3.4 3.8
V
V
VREG = VCC - 0.2V
215 290 mA VCC = 3.6V, POUT = 26dBm
3
4
mA
54
60
mA VCC = 3.6V, VREG = 3.4V, ANT_SEL = TXRX_SEL = 3.4V at POUT = 0dBm
0.2 0.5 mA VCC = 3.6V TXRX_SEL, ANT_SEL and VREG = 0.0V
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140130
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 9