RF6525 Datasheet, PDF (3/11 Pages) RF Micro Devices – 3.0V TO 4.2V, 2.4GHz FRONT END MODULE

RF6525
Parameter
Transmit Parameters,
cont.
Gain Settling Time
Current Sourced through
TXCT Pin
Voltage Drop from TXCT Pin
to TXP/TXN
Receive Parameters
(LNA Mode)
Frequency
Gain
Noise Figure
Current
Input IP3
Gain Flatness
Input Return Loss
Output Return Loss
Amplitude Imbalance
Phase Imbalance
Current Sourced through
RXCT Pin
Voltage Drop from RXCT Pin
to RXP/RXN
ByPass Mode
Frequency
Insertion Loss
Noise Figure
Current
IIP3
Gain Flatness
Input Return Loss
Output Return Loss
Amplitude Imbalance
Phase Imbalance
Current Sourced through
RXCT Pin
Voltage Drop from RXCT Pin
to RXP/RXN
Antenna Switch
RF-to-Control Isolation
RF-to-ANT Isolation
Specification
Min.
Typ.
Max.
1
2
18.0
0.1
2400
8
5
-0.7
-1
-15
2400
-0.1
-1
-15
17
11.5
2.5
8
10
10
0.05
5
5
5
50
18
15
9.5
0.05
50
20
2483
14
3.5
12
0.7
8
1
15
1
0.1
2483
7
0.1
12
8
1
15
1
0.1
RF-to-RF Isolation
18
20
Switch Control Logic = HIGH =V_CC-0.3
Switch Control Logic = LOW
0.0
= V_CC
0.2
Unit
Condition
uS
mA
V
MHz
dB
dB
mA
dBm
dB
dB
dB
dB
deg
mA
V
From antenna to RX pin (entire RX path). (All condi-
tions.)
From antenna to RX pin (entire RX path).
LNA + Switches
At nominal conditions
over frequency
Differential RX Port
On 180 degrees typical, differential RX Port
MHz
dB
Entire RX path
dB
Entire RX path
uA
ANT1
uA
ANT2
dBm
Nominal
dB
over frequency
dB
dB
dB
Differential RX Port
deg
On 180 degrees typical, differential RX Port
mA
V
dB
Measured at any control pin while in TX or RX mode.
dB
Measured from Antenna to RX port while in Transmit
mode. Measured from Antenna to TX port while in
Receive mode.
dB
Measured from TX port to RX port while in receive or
transmit modes.
V
All Logic I/O’s
V
All Logic I/O’s
DS111110
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
3 of 11