RF6525 Datasheet, PDF (2/11 Pages) RF Micro Devices – 3.0V TO 4.2V, 2.4GHz FRONT END MODULE

RF6525
Absolute Maximum Ratings
Parameter
DC Supply Voltage
Operating Case Temperature
Storage Temperature
ESD Human Body Model RF Pins
ESD Human Body Model All Other
Pins
ESD Charge Device Model All Pins
Moisture Sensitivity Level
Maximum Input Power to PA and
LNA (No Damage in High Gain
Mode)
Rating
5
-40 to +85
-40 to +150
1000
500
500
MSL 2
+5
Unit
V
°C
°C
V
V
V
dBm
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Overall
Operating Frequency Range
Operating Voltage (V_CC)
Leakage Current
Transmit Parameters
Frequency
Input Return Loss
Amplitude Imbalance
Phase Imbalance
Output Return Loss
Gain
Gain Variation
Gain Flatness
Rated Output Power
Supply Current
Supply Current
Thermal Resistance
2nd Harmonic Level
3rd Harmonic Level
VSWR Stability and Load
Mismatch Susceptibility
VSWR No Damage
Specification
Min.
Typ.
Max.
2400
2483
3.0
3.6
4.2
0.5
2400
2483
-13
-9.6
-1
1
-15
15
-14
-9.6
25
28
-1.5
+1.5
-1
+1
20
22
19
200
230
175
205
53
-45
-42
-45
-42
4:1
8:1
Unit
MHz
V
uA
Condition
Specifications must be met across supply voltage,
control voltage, and temperature ranges unless oth-
erwise noted. Typical conditions: T=25°C,
V_CC=3.6V, TX_EN=High
V_CC=3.6V, RF=OFF, TX_EN=Low, RX_EN=Low.
LNA_EN, ANT_SEL, and LNA Mode=Low.
MHz
dB
dB
deg
dB
dB
dB
dB
dBm
dBm
mA
mA
°C/W
dBm/MHz
dBm/MHz
Over all conditions for both Antenna 1 and Antenna
2
Over all conditions for both Antenna 1 and Antenna
2
At rated power and nominal conditions
Over temperature
Over frequencies and voltage
V_CC=2.6V, V_CC_Bias=3.0V
P_O=22dBm 802.15.4 OQPSK. Typical Conditions.
P_O=20dBm 802.15.4 OQPSK.
V_CC = 3.6V, P_OUT = 22dBm, T_REF = 85°C
Measured using standard 802.15.4 OQPSK modula-
tion signal at P_OUT=20dBm over temperature, fre-
quency, and voltage
Measured using standard 802.15.4 OQPSK modula-
tion signal at P_OUT=20dBm over temperature, fre-
quency, and voltage
No spurs above -45dBm
2 of 11
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS111110