RFCA1008 Datasheet, PDF (21/23 Pages) RF Micro Devices – 5V Single Supply

RFCA1008
Pin
1
2
3
4
5
6
7
8
EPAD
Pin Names and Descriptions
Name
RFIN
GND
GND
RFIN
RFOUT/VCC
GND
GND
RFOUT/VCC
GND
Description
RF input pin. External DC-blocking capacitor is required.
Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground
leads as possible.
Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground
leads as possible.
RF input pin. External DC-blocking capacitor is required.
RF output and bias pin (open collector).
Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground
leads as possible.
Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground
leads as possible.
RF output and bias pin (open collector).
Exposed area on the bottom side of the package must be soldered to the ground plane of the board for
optimum thermal and RF performance. Several vias should be located under the EPAD as shown in the
recommended land pattern.
Suggested Pad Layout
DS130627
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
21 of 23