RFCA1008 Datasheet, PDF (2/23 Pages) RF Micro Devices – 5V Single Supply

RFCA1008
Absolute Maximum Ratings
Parameter
Rating
Unit
Max Device Current (I_D)
300
mA
Max Device Voltage (V_D)
6
V
Max RF Input Power
18
dBm
Max Junction Temp (T_J)
150
°C
Operating Temperature Range (T_L)
-40 to +85
°C
Storage Temperature
-40 to +150
°C
Notes:
1. Operation of this device beyond any one of these limits may cause per-
manent damage. For reliable continuous operation, the device voltage
and current must not exceed the maximum operating values specified in
the Absolute Maximum Ratings table above.
2. Bias Conditions should also satisfy the following expression:
I_DV_D < (T_J - T_L)/R_TH, j - l and T_L = T_LEAD
Nominal Operating Parameters
Parameter
Specification
Min. Typ. Max.
Frequency Range
Small Signal Gain
Gain Flatness
Output IP3
50
1000
16.8
17.4
17.9
±0.5
40
Output IP2 Plus
65
Output IP2 Minus
70
P1dB
23
Input Return Loss
27
Output Return Loss
16
Noise Figure (Balun Insertion Loss
4.0
Included)
CSO
80
CTB
76
XMOD
69
Device Operating Voltage
5.0
Device Operating Current
215
Thermal Resistance
40
Note: V_CC = 5V, I_C = 215mA, T_L = 25°C, Z_S = Z_L = 75Ÿ, Push Pull Application Circuit
Unit
MHz
dB
dB
dB
dB
dBm
dBm
dBm
dBm
dB
dB
dB
dBc
dBc
dBc
V
mA
°C/W
Condition
17dB Application, V_CC = 5V, I_CC = 215mA
50MHz; 5V, 25°C
500MHz; 5V, 25°C
1000MHz; 5V, 25°C
50MHz to 1000MHz per
ANSI/SCTE-144 2007
550MHz, Tone Spacing = 6MHz, P_OUT per
Tone = +5dBm
550MHz, Tone Spacing = 30MHz P_OUT per
Tone = 0dB
500MHz
50MHz to 1000MHz
79 Channel, Flat Tilt, +34dBmV
V_CC = 5V
Junction to backside PCB under IC
2 of 23
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS130627