SGA6586Z Datasheet, PDF (2/6 Pages) RF Micro Devices – DC to 4000MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER

SGA6586Z
Absolute Maximum Ratings
Parameter
Rating
Unit
Max Device Current (I_D)
Max Device Voltage (V_D)
Max RF Input Power
160
mA
7
V
+16
dBm
Max Junction Temp (T_J)
Operating Temp Range (T_L)
Max Storage Temp
+150
°C
-40 to +85
°C
+150
°C
Operation of this device beyond any one of these limits may cause permanent dam-
age. For reliable continuous operation, the device voltage and current must not
exceed the maximum operating values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
I_DV_D<(T_J-T_L)/R_TH, j-l
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Typical Performance at Key Operating Frequencies
Parameter
Unit 100 500 850 1950
MHz MHz MHz MHz
Small Signal Gain
dB
25.8
23.8
18.4
Output Third Order Intercept Point
dBm
32.2
33.8
32.2
Output Power at 1dB Compression
dBm
20.9
21.5
18.0
Input Return Loss
dB
32.2
23.3
22.8
21.4
Output Return Loss
dB
16.8
18.2
23.0
18.0
Reverse Isolation
dB
24.0
23.9
23.6
21.2
Noise Figure
dB
2.5
2.7
3.1
Test Conditions: V_S=8V, I_D=80mA Typ., OIP₃ Tone Spacing=1MHz, P_OUT per tone=-5dBm, R_BIAS=39Ω, T_L=25°C, Z_S=Z_L=50Ω
2400
MHz
16.7
30.2
16.8
17.4
17.4
19.7
3.7
OIP vs. Frequency
3
V_D= 4.9 V, I_D= 80 mA
40
P vs. Frequency
1dB
V_D= 4.9 V, I_D= 80 mA
24
35
30
25
T_L=+25ºC
20
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
22
20
T_L=+25ºC
18
16
14
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
3500
MHz
14.4
14.2
16.6
Noise Figure vs. Frequency
V_D= 4.9 V, I_D= 80 mA
5
4
3
2
T_L=+25ºC
1
0
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
2 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS100916