SBB4089Z Datasheet, PDF (2/8 Pages) RF Micro Devices – 50MHz to 6000MHz CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER

SBB4089Z
Absolute Maximum Ratings
Parameter
Rating
Unit
Device Current (I_D)
Max Device Voltage (VD)
100
mA
5.5
V
Max RF Input Power
24
dBm
Max Operating Dissipated Power
0.55
W
Junction Temp (T_J)
Storage Temp
+150
°C
+150
°C
ESD Rating - Human Body Model
(HBM)
Class 1C
Moisture Sensitivity Level
MSL2
Operation of this device beyond any one of these limits may cause permanent dam-
age. For reliable continuous operation, the device voltage and current must not
exceed the maximum operating values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
I_DV_D<(T_J-T_L)/R_TH, j-l and T_L=T_LEAD
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Typical Performance at Key Operating Frequencies (With 0.5GHz to 3.5GHz Application Circuit)
Parameter
Unit 50 100 200 500 850 1950
MHz MHz MHz MHz MHz MHz
Small Signal Gain
dB
16.3
15.7
15.7
15.6
15.6
15.5
Output Third Order Intercept Point dBm 38.7
40.6
39.7
38.8
39.3
35.2
Output Power at 1dB Compression dBm 18.5
18.7
19
19.2
19.1
19.2
Input Return Loss
dB
11.2
16.3
22.4
25.1
29.9
19.4
Output Return Loss
dB
19.4
25.4
29.8
32.1
26.4
17.2
Reverse Isolation
dB
17.7
17.8
17.8
18.4
18.4
18.9
Noise Figure
dB
4.3
4.3
4.3
4.3
4.3
4.6
Test Conditions: VCC=5V, I_D=80mA Typ., OIP₃ Tone Spacing=1MHz, P_OUT per tone=0dBm, T_L=25°C, Z_S=Z_L=50
2500
MHz
15.5
32.8
18.6
17.6
14.7
19.1
4.5
3500
MHz
15.5
29.1
16.7
14.9
13.2
19.8
4.8
4000
MHz
15.0
26.1
14.1
21.3
17.4
20.8
5.1
2 of 8
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS150622