RFSW6032 Datasheet, PDF (2/9 Pages) RF Micro Devices – Low Insertion High Isolation SP3T Switch

RFSW6032
Absolute Maximum Ratings
Parameter
Control Voltage (VCTL)
Supply Voltage (VDD)
Maximum CW Input Power for VDD = 3V
Max Input Power During Active Switching
Storage Temperature Range
ESD Rating - Human Body Model (HBM)
Moisture Sensitivity Level
Rating
3.0
6.0
35
27
-40 to +150
2000
MSL2
Unit
V
V
dBm
dBm
°C
V
Recommended Operating Condition
Parameter
Operating Temperature Range
VDD – Switch Supply Voltage
Specification
Min
Typ
Max
-40
+85
3
5
5.5
Unit
°C
V
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Parameter
Specification
Unit Condition
Min Typ Max
General Performance
Operating Frequency Range
Insertion Loss (RFC to
RF1/RF2/RF3)
Isolation (RFC to RF1/RF2/RF3)
Isolation (RF1 to RF2/RF3)
Return Loss (RF1/RF2 On-state)
900MHz Second Harmonic
Electrical Specifications, TA = 25°C, V_DD = 3V to 5V
5
6000 MHz
0.35 0.45 dB 925MHz
0.45 0.6 dB 1990MHz
0.5 0.7 dB 2650MHz
1.2
dB 5850MHz
36
dB 925MHz
29
dB 1990MHz
19
dB 2650MHz
15
dB 5850MHz
35 40
dB 925MHz
30 37
dB 1990MHz
32
dB 2650MHz
19
dB 5850MHz
23
dB 5MHz ~ 3GHz
14
dB 3GHz ~ 6GHz
-107 -85 dBc Pin = 28dBm
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140821
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 9