RFFC2071 Datasheet, PDF (2/23 Pages) RF Micro Devices – 2.7GHz RF SYNTHESIZER/VCO WITH INTEGRATED RF MIXER

RFFC2071/2072
Absolute Maximum Ratings
Parameter
Supply Voltage (V_DD)
Input Voltage (V_IN) any pin
RF/IF mixer input power
Operating Temperature Range
Thermal Resistance (R_TH)
Storage Temperature Range
Rating
-0.5 to +3.6
-0.3 to V_DD + 0.3
+15
-40 to +85
32
-65 to +150
Unit
V
V
dBm
°C
°C/W
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Specification
Min.
Typ.
Max.
ESD Requirements
Human Body Model
2000
1500
Charge Device Model
500
Operating Conditions
Supply voltage (V_DD)
2.7
3.0
3.3
Temperature (T_OP)
-40
+85
Logic Inputs/Outputs (V_DD = Supply to DIG_VDD pin)
Input low voltage
-0.3
+0.5
Input high voltage
V_DD / 1.5
V_DD
Input low current
-10
+10
Input high current
-10
+10
Output low voltage
Output high voltage
Load resistance
0
0.8*V_DD
10
0.2*V_DD
V_DD
Load capacitance
20
GPO Drive Capability
Sink Current
20
Source Current
20
Output Impedance
25
Static
Supply Current (I_DD) with 1GHz LO
100
125
Standby
2
Power Down Current
300
Mixer 1/2 (Mixer output driving 4:1 balun)
Gain
-2
Noise Figure
10
13
IIP3
+10
+23
Input port frequency range
30
2700
Mixer input return loss
10
Output port frequency range
30
2700
Unit
Condition
V
DC Pins
V
All Pins
V
All Pins
V
°C
V
V
A
Input = 0V
A
Input = V_DD
V
V
kΩ
pF
mA
at V_OL = 0.6V
mA
at V_OL = 2.4V

mA
Low current, MIX_IDD=1, one mixer enabled.
mA
High linearity, MIX_IDD=6, one mixer enabled.
mA
Reference oscillator and bandgap only.
A
ENBL=0 and REF_STBY=0
dB
dB
dB
dBm
dBm
MHz
dB
MHz
Not including balun losses
Low current setting
High linearity setting
Low current setting
High linearity setting
100Ω differential
2 of 23
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS140110