RF5117_11 Datasheet, PDF (2/13 Pages) RF Micro Devices – LINEAR POWER AMPLIFIER

RF5117
Absolute Maximum Ratings
Parameter
Supply Voltage
Power Control Voltage (V_REG)
DC Supply Current
Input RF Power
Operating Ambient Temperature
Storage Temperature
Moisture Sensitivity
Rating
-0.5 to +6.0
-0.5 to 3.5
600
+10
-40 to +85
-40 to +150
JEDEC Level 2
Unit
V_DC
V
mA
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Overall
Frequency Range
Maximum Linear Output Power
VCC = 3.0 V
VCC = 5.0 V
Linear Efficiency
Error Vector Magnitude (EVM)
Small Signal Gain
Reverse Isolation
Second Harmonic
802.11B Adjacent Channel Power
Alternate Channel Power
Isolation
Input Impedance
Input VSWR
Power Down
V_REG “ON”
V_REG “OFF”
Power Supply
Operating Voltage
Current Consumption
V_REG Current (Total)
Specification
Min.
Typ.
Max.
1800 to 2800
22
27
25
2.5
24
26
28.5
30
-35
-38
-32
-56
-52
35
45
50
2:1
2.1
2.7
3.0
0
0.5
3.0 to 5.0
500
200
220
110
5
10
10
15
Unit
MHz
dBm
dBm
%
%
dB
dB
dBc
dBc
dBc
dB

Condition
T=25 °C, V_CC=3.0V, V_REG=2.7V,
Freq=2450MHz, circuit per evaluation board
schematic.
With 802.11B modulation (11Mbit/s) and
meeting 802.11B spectral mask.
P_O=17dBm, EVM increases over 11g,
54MBPS signal input
P_IN = -7 dBm
P_OUT=21dBm, V_CC=3.0V
P_OUT=21dBm, V_CC=3.0V
In “OFF” state, P_IN=-5.0dBm
With external matching
With external matching
V
Voltage supplied to control input; device is
“ON”
V
Voltage supplied to control input; device is
“OFF”
V
mA
At max output power
mA
P_OUT=21dBm, V_CC=3.0V
mA
Idle current, V_CC=3.0V, V_REG=2.7V
mA
V_CC = 3.0 V
mA
V_CC = 5.0 V
2 of 13
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS110617