RFPA2089 Datasheet, PDF (15/16 Pages) RF Micro Devices – InGaP HBT POWER AMPLIFIER 0.25W, 50MHz to 2700MHz

RFPA2089
Evaluation Board Assembly Drawing
2.58GHz to 2.69GHz Application Circuit
Pin Names and Descriptions
Pin
Name
Description
1
RF IN
RF Input. External DC Block is Required.
2
GND
DC and RF Ground
3
RF OUT/VCC ^{RF Output, Device Collector}
4
GND
DC and RF Ground. Must be soldered to EVB ground plane over a bed of vias for thermal and RF
performance.
DS130211
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
15 of 16