RFSW6024 Datasheet, PDF (11/13 Pages) RF Micro Devices – 300MHz to 6000MHz Operation

RFSW6024
Pin Names and Descriptions
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
EPAD
Name
VDD
VCTL
RFC
NC
VEN
GND or NC
GND or NC
NC
RF1
GND or NC
GND or NC
RF2
NC
GND or NC
GND or NC
NC
GND
Description
Supply Voltage
Logic Control Input
RF Common Port
No Internal Connection
Logic input for putting switch in “all-off” state. Logic high for “all-off” state.
Ground or No Connection
Ground or No Connection
No Internal Connection
RF Port 1
Ground or No Connection
Ground or No Connection
RF Port 2
No Internal Connection
Ground or No Connection
Ground or No Connection
No Internal Connection
RF and DC Ground: Must be soldered to EVB ground plane over a bed of vias
Note: RFMD recommends that the NC pins be grounded on the EVB to maximize isolation.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150202
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
11 of 13