RFMD2080 Datasheet, PDF (10/19 Pages) RF Micro Devices – 45MHz TO 2700MHz IQ MODULATOR WITH SYNTHESIZER/VCO AND BASEBAND INTERFACE`

RFMD2080
Each GPO pin can supply up to and above 20mA load current. The output voltage of the GPO high state will drop with increased
current drive, by approximately 25mV/mA. Similarly the output voltage of the GPO low state will rise with increased current,
again by approximately 25mV/mA.
Programming Information
Please refer to the register map and programming guides which are available for download from http://rfmd.com/prod-
ucts/IntSynthModulator/.
Evaluation Boards
The evaluation board for the RFMD2080 is provided as part of a design kit, along with the necessary cables and programming
software tool to enable full evaluation of the device. The evaluation board has been configured for wideband operation; the
modulator output is connected to a wideband transmission line transformer balun. Design kits can be ordered from
www.rfmd.com or from local RFMD sales offices and authorized sales channels. For ordering codes please see "Ordering Infor-
mation" on the last page of this data sheet. For further details on how to set up the design kits please refer to the user guide
which can be downloaded from http://rfmd.com/products/IntSynthModulator/.
10 of 19
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS140110