RWP06040-G1 Datasheet, PDF (5/5 Pages) RFHIC – Wideband Power Amplifier

Wideband Power Amplifier RWP06040-G1
Pin Description
Pin No
Port Name
Function
1
RF IN
2
Vcc (+28V)
3
Shut Down (+5V)
RF Input
DC Supply
Shut Down @ TTL High, Enable @ TTL Low
4
Switch ON/OFF
Disable @ TTL High (Switch Status : Off)
5
GND
Ground
6
RF OUT
RF Output
* Terminal Pin Information : ASK206091,AA (Acethink, Pin) , ASK20556,AA-1(Acethink, Pin Socket)
* Recommended Screw Torque : 8.0kgf.cm±1 using SEMS M3 10mm Bolt
Note :
RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not
assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or
incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for
inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not
intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells
such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders,
employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of
whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.
▪ Tel : [phone]
▪ www.rfhic.com/contact
▪ All specifications may change without notice.
▪ Version 1.0