RWP06040-G1 Datasheet, PDF (1/5 Pages) RFHIC – Wideband Power Amplifier

Wideband Power Amplifier RWP06040-G1
Product Features
GaN on SiC Broadband High Power Amplifier
500 to 1000MHz Operation Bandwidth
Small Signal Gain 40dB min
40W Typical , P3dB
Application
UHF/Military
Package : DP-75
Description
The power amplifier module is specifically designed for Military markets.
Operating frequency range is from 500MHz to 1000MHz.
Gallium Nitride on SiC technology is used and attached on an aluminum sub carrier. Full in/out matching for broadband
performance is already applied.
Improved thermal handling by patented technology.
Typical Specifications
No
Item
1 Bandwidth
2 Small Signal Gain
3 Gain Variation vs Temperature
4 Gain Variation vs Frequency
5 P₃dB
OIP3 @ Po = +33dBm
6
(1MHz Tone spacing, CW 2-Tone)
7 Input Return Loss
8 Output Return Loss
9 2^nd Harmonic suppression
10 Supply Voltage
11 Quiescent Current consumption
12 Current Consumption
13 On/Off Switching Time
Shut Down or Switch On/Off
14
TTL Voltage
Conditions
-20°C to 60°C
500MHz to 700MHz
700MHz to 1000MHz
V_CC = +28V; T = 25℃; Z_S = Z_L = 50Ω
Min Typ Max Unit
500
1000 MHz
40
42
44
dB
-2
+2
dB
±1
±2 dBpp
44
45
dBm
46
47
500MHz to 1000MHz
48
46
dBm
CW 1-tone
@Po = +30dBm, Freq 500MHz
Vcc(=Vds)
CW 1-tone @ Po = +46dBm
On : TTL "Low"
Off : TTL "High"(300mA@Disable)
On : TTL “Low”(Enable)
Off : TTL “High”
-5
-3
dB
-12
-7
dB
-35 -30 dBc
27.5 28
30
V
3
3.5
A
4.5
5
A
3
5
uS
0
0.5
V
2.5
5
5.5
▪ Tel : [phone]
▪ www.rfhic.com/contact
▪ All specifications may change without notice.
▪ Version 1.0