RX210_15 Datasheet, PDF (97/223 Pages) Renesas Technology Corp – Renesas MCUs

RX210 Group
5. Electrical Characteristics
[Chip version C]
Table 5.9 DC Characteristics (8)
Conditions: VCC = AVCC0 = 2.7 to 5.5 V, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T_a = –40 to +105°C
Item
Symbol Typ. Max.
Supply High-speed
current*¹ operating mode
Normal operating No peripheral
mode
operation*²
All peripheral
operation:
Normal*³
All peripheral
operation:
Max.*³
Sleep mode
No peripheral
operation
All peripheral
operation:
Normal
All-module clock stop mode
Increase during BGO operation*⁴
ICLK = 50 MHz I_CC
ICLK = 50 MHz
ICLK = 50 MHz
ICLK = 50 MHz
ICLK = 50 MHz
ICLK = 50 MHz
10
—
31.5 —
—
55
7.5
—
17.5 —
6.7
—
25
—
Unit
Test
Conditions
mA
Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when internal pull-up MOSs
are in the off state.
Note 2. Clock supply to the peripheral functions is stopped. This does not include BGO operation. The clock source is PLL and the VCO
oscillation frequency is 100 MHz. BCLK, FCLK, and PCLK are set to divided by 64.
Note 3. Clocks are supplied to the peripheral functions. This does not include BGO operation. The clock source is PLL and the VCO
oscillation frequency is 100 MHz. BCLK, FCLK, and PCLK are ICLK divided by 2.
Note 4. This is the increase if data is programmed to or erasing from the ROM or E2 DataFlash during program execution.
R01DS0041EJ0150 Rev.1.50
Oct 18, 2013
Page 97 of 221