English
Language : 

R32C111_15 Datasheet, PDF (94/102 Pages) Renesas Technology Corp – RENESAS MCU
Revision History
R32C/111 Group Datasheet
Rev.
0.03
0.30
Date
Oct 17, 2007
Aug 19, 2008
Page
—
—
—
1
2
3
4
6
7
8
11
12
13, 14
—
15
Description
Summary
Initial release
Second edition released
The manual in general
• Maximum operating frequency changed from 48 MHz to 50 MHz
• Specification of on-chip oscillator disclosed
• Microprocessor mode becomes optional
• “memory-expanded mode” changed to “memory expansion mode”
Chapter 1
• “(MCUs)” added to line 1 of 1.1
• Applications in 1.1.1 revised and modified
• “Attention Users” below 1.1.1 modified to “Notes to users”; “The
specification” in this box changed to “Specifications”
• “instructions” in “CPU” of Table 1.1 deleted
• Minimum instruction execution time in “CPU” of Table 1.1 changed
• Microprocessor mode in CPU” of Table 1.1 changed to optional
• “TBD” for “Voltage Detection” in Table 1.1 deleted
• “3 circuits” for “Clock” in Table 1.1 changed to “4 circuits”
• “Total interrupt vectors” in Table 1.1 changed to “Interrupt vectors”
• Trigger sources” for DMA in Table 1.1 modified to “Request sources”;
Request sources for “DMA” defined as 51
• Scribal error: “peripheral interrupt sources” for “DMACII” in Table 1.1
corrected to “peripheral interrupt source”
• Unit names in Table 1.2 sorted in chapter order
• Description for “A/D Converter” in Table 1.2 changed
• “Operating frequency” in Table 1.2 changed from “48 MHz” to “50
MHz”
• “version N” and “version D” added to “Operating Temperature” in Table
1.2; “optional” deleted
• Values for “Current Consumption” in Table 1.2 added
• “version N” and “version D” added to Table 1.3
• All “version N”s in Table 1.3 become on planning phase
• Figure 1.2 modified
• Note 2 for Figure 1.3 modified
• Scribal error: “CLK5/” (pin No. 21) in Table 1.4 corrected to “CLK5”
• Description for “Connecting pins for decoupling capacitor”, “CNVSS”,
and “Debug port” in Table 1.7 modified
• Some descriptions for “WR0/WR1/WR/BC0/BC1/RD” of “Bus control
pins” in Table 1.8 modified
• Functional category items in Tables 1.9 and 1.10 sorted in chapter
order; Descriptions modified
Chapter 2
• Descriptions for this chapter modified; Expression “DMAC-related
registers”s modified to “DMAC-associated registers”s
• “Data register” and “Address register” in Figure 2.1 pluralized;
Explanation in Notes 1 and 2 for this figure revised
A- 1