R32C111_15 Datasheet, PDF (65/102 Pages) Renesas Technology Corp – RENESAS MCU

R32C/111 Group
5. Electrical Characteristics
Table 5.16
V_CC1 = V_CC2 = 5 V
Electrical Characteristics (2/3)
(V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V, T_a = T_opr, and f_(CPU) = 50 MHz, unless otherwise
noted)
Symbol
Characteristic
Measurement
Condition
Min.
Value
Typ. Max.
Unit
V_T+ - V_T- Hysteresis HOLD, RDY, NMI, INT0 to INT5, KI0 to KI3,
TA0IN to TA4IN, TA0OUT to TA4OUT,
TB0IN to TB5IN, CTS0 to CTS8,
CLK0 to CLK8, RXD0 to RXD8,
SCL0 to SCL6, SDA0 to SDA6, SS0 to SS6,
SRXD0 to SRXD6, ADTRG, IIO0_0 to IIO0_7,
IIO1_0 to IIO1_7, UD0A, UD0B, UD1A,
UD1B, ISCLK2, ISRXD2, IEIN ⁽¹⁾
0.2
1.0 V
RESET
0.2
1.8 V
I_IH
High level XIN, RESET, CNVSS, NSD,
input
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
current
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
V_I = 5 V
P9_1, P9_3 to P9_7, P10_0 to P10_7 ⁽²⁾
5.0 µA
I_IL
Low level XIN, RESET, CNVSS, NSD,
input
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
current
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
V_I = 0 V
P9_1, P9_3 to P9_7, P10_0 to P10_7 ⁽²⁾
-5.0 µA
R_PULLUP Pull-up
resistor
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_1, P9_3 to P9_7,
P10_0 to P10_7 ⁽²⁾
V_I = 0 V
30 50 170 k
R_fXIN
Feedback XIN
resistor
1.5
M
R_fXCIN Feedback XCIN
resistor
15
M
Notes:
1. Pins TB4IN, CTS4, CLK4, RXD4, SCL4, SDA4, SS4, SRXD4, and UART6, and UART7 are available
in the 100-pin package only.
2. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, P4, P5, P9_1, and P9_4 to P9_7 are available in
the 100-pin package only.
R01DS0062EJ0130 Rev.1.30
Mar 3, 2014
Page 65 of 93