M37271MF Datasheet, PDF (91/98 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER

MITSUBISHI MICROCOMPUTERS
M37271MF-XXXSP
M37271EF-XXXSP, M37271EFSP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
GZZ–SH10–44B < 5ZA0 >
740 FAMILY MASK ROM CONFIRMATION FORM
SINGLE-CHIP MICROCOMPUTER M37271MF-XXXSP
MITSUBISHI ELECTRIC
Mask ROM number
Date :
Section head
signature
Supervisor
signature
* Customer
Company
name
Date
issued
Date :
Note : Please fill in all items marked *.
TEL
Submitted by Supervisor
(
)
* 1. Confirmation
Specify the name of the product being ordered and the type of EPROMs submitted.
Three EPROMs are required for each pattern.
If at least two of the three sets of EPROMs submitted contain identical data, we will produce masks based on
this data. We shall assume the responsibility for errors only if the mask ROM data on the products we produce
differs from this data. Thus, extreme care must be taken to verify the data in the submitted EPROMs.
Checksum code for entire EPROM
EPROM type (indicate the type used)
27C101
EPROM address
0000016
0000F16
Product name
ASCII code :
‘M37271MF –’
0100016
0FFFF16
1080016
data
ROM 60K bytes
1E43F16
OSD ROM
(hexadecimal notation)
(1) Set “FF16” in the shaded area.
(2) Write the ASCII codes that indicates the product name of “M37271MF–” to addresses 0000 16 to 000F16.
EPROM data check item (Refer the EPROM data and check “ ” in the appropriate box)
q Do you set “FF16” in the shaded area ?
→ Yes
q Do you write the ASCII codes that indicates the product
name of “M37271MF–” to addresses 0000 16 to 000F16 ? → Yes
* 2. Mark specification
Mark specification must be submitted using the correct form for the type package being ordered fill out the appropriate
mark specification form (52P4B for M37271MF-XXXSP) and attach to the mask ROM confirmation form.
90