R0E00008AKCE00EP9 Datasheet, PDF (7/23 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a Emulator
Section 4 E8a Connecting Connector Pin Assignments
Section 4 E8a Connecting Connector Pin Assignments
Figure 4.1 shows the pin assignments for the E8a connecting connector.
Pin 1 mark
Connector
Pin 2
Pin 1
Pin 1 mark
Pin 14
Pin 13
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
R8C/18, 19, 1A and 1B
MCU signals
N.C.
Vss
N.C.
Vss
N.C.
Vss
MODE
Vcc
N.C.
Vss
N.C.
Vss
RESET
Vss
Figure 4.1 E8a Connecting Connector Pin Assignments
Note:
Pin 14 is used for checking the connection between the E8a and the user system, and pins 4, 6 and 10 are connected to
the internal circuit. These pins are not directly connected to the Vss inside the E8a. Make sure pins 2, 4, 6, 10, 12 and
14 are all connected to the Vss.
REJ10J1646-0200 Rev.2.00 Jun. 17, 2009
Page 4 of 18