R8C32G_15 Datasheet, PDF (50/57 Pages) Renesas Technology Corp – RENESAS MCU

R8C/32G Group, R8C/32H Group
5. Electrical Characteristics
Table 5.24 Electrical Characteristics (5) [2.7 V ≤ Vcc < 3.3 V]
(Topr = −40 to 85°C (J version), unless otherwise specified.)
Symbol
Parameter
Condition
ICC
Power supply current High-speed
XIN = 20 MHz (square wave)
(2.7 V ≤ Vcc < 3.3 V)
Single-chip mode,
output pins are open,
other pins are VSS
clock mode ⁽¹⁾
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
No division
XIN = 16 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
No division
XIN = 10 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
No division
XIN = 20 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8
XIN = 16 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8
XIN = 10 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8
High-speed
XIN clock off
on-chip oscillator ^{High-speed on-chip oscillator on fOCO-F = 20}
mode ⁽¹⁾
MHz
Low-speed on-chip oscillator on = 125 kHz
No division
XIN clock off
High-speed on-chip oscillator on fOCO-F = 20
MHz
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8
Low-speed
XIN clock off
on-chip oscillator ^{High-speed on-chip oscillator off}
mode
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8, FMR27 = 1, VCA20 = 0
Wait mode
XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
While a WAIT instruction is executed
Peripheral clock operation
VCA27 = VCA26 = VCA25 = 0
VCA20 = 1
XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
While a WAIT instruction is executed
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
VCA20 = 1
Stop mode
XIN clock off, Topr = 25°C
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
CM10 = 1
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
XIN clock off, Topr = 85°C
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
CM10 = 1
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
Standard
Min. Typ. Max.
Unit
− 7.0 14.5 mA
− 5.6 12.0 mA
−
3.6
−
mA
−
3.0
−
mA
−
2.2
−
mA
−
1.5
−
mA
− 7.0 14.5 mA
−
3.0
−
mA
−
85 180 µA
−
15 110 µA
−
5 100 µA
− 2.0 5.0 µA
− 13.0 −
µA
Note:
1.
The typical value (Typ.) indicates the current value when the CPU and the memory operate.
The maximum value (Max.) indicates the current when the CPU, the memory, and the peripheral functions operate and the
flash memory is programmed/erased.
R01DS0026EJ0100 Rev.1.00
Nov 16, 2011
Page 50 of 54