PD703223_15 Datasheet, PDF (35/41 Pages) Renesas Technology Corp – V850ES/GB1TM VENUS 32-/16-bit Single-Chip Microcontroller with CAN Interface

µPD703223, µPD703224, µPD703225, µPD703226
2.5.7 A/D converter
T_A = -40°C to +85°C, V_DD50 = V_DD51 = AV_DD = 4.5 V ~ 5.5 V, V_SS51 = V_SS30 = V_SS31 = AV_SS = 0 V
Table 2-19: A/D Converter Characteristics
Parameter
Resolution
Overall Error^{Note 1}
Conversion time^{Note 2}
Sampling time^{Note 3}
Analog input voltage
Analog supply current
Symbol
Test Conditions
-
-
T_CONV
T_SAM
V_IAN
I_AVDD A/D converter is operating
I_{LAVDD A/D converter is stopped}^{Note 4}
MIN.
5
AV_SS
TYP.
10
T_CONV/6
4.0
1.0
MAX.
±3
12
AV_DD
8.0
5.0
Unit
Bit
LSB
µs
µs
V
mA
µA
Notes: 1. The quantization error is not included
2. The conversion time T_CONV depends on the setting of the ADM register
3. The sampling time T_SAM depends on the setting of the ADM register
4. The leakage current specification becomes valid if the A/D converter reference voltage is
switched off.
2.5.8 Voltage regulator
T_A = -40°C to +85°C, V_DD50 = V_DD51 = AV_DD = 4.0 V ~ 5.5 V, V_SS51 = V_SS30 = V_SS31 = AV_SS = 0 V
Parameter
Output voltage
stabilization time
Table 2-20: Voltage regulator
Symbol
t_REG
Test Conditions
Time starts when V_DD50 reaches
minimum value of 4.0 V
(C_REGC0 = C_REGC1 = 1 µF) ^Note
MIN.
MAX. Unit
2
ms
Note: C_REGC0 & C_REGC1 are respectively connected to REGC0 and REGC1 pins. They must have the
same value.
Remark: To improve EMI and noise filtering, it might be necessary to connect small size capaci-
tances in parallel with C_REGC0 & C_REGC1.
DATA SHEET U15870EE1V1DS00
33