RX630 Datasheet, PDF (3/8 Pages) Renesas Technology Corp – Renesas Starter Kit Sample

RX630
Renesas Starter Kit Sample Code for CubeSuite+
4. Deleting Sub-Projects that are not to be Used (When Using the Sample Code)
The building process builds all projects in the Project Tree, including non-active sub-projects.
Sub-projects that you don’t intend to use can be deleted from the Project Tree by the method shown below.
4.1 How to delete sub-projects
Select and right-click on sub-projects for peripheral functions that are not to be used from the Project Tree (selecting
multiple sub-projects is possible by also using the [Ctrl] key or [Shift] key). This opens the context menu. Select
[Remove from Project].
5. Changing the Debug Tool
When the active debug tool is not the E1 emulator [RX E1(JTAG)], you will need to change the debug tool.
Confirm the active debug tool by referring to “debug tool” in the Project Tree.
When the debug tool is not [RX E1(JTAG)], select [Debug] -> [Using Debug Tool] -> [RX E1(JTAG)] from the menu.
When the debug tool is [RX E1(JTAG)], changing the debug tool is not necessary.
RX E1(JTAG) is the active
debug tool in this example.
R20AN0276EJ0100 Rev. 1.00
Jan. 17, 2014
Page 3 of 6