HD74CDCF2509B Datasheet, PDF (3/9 Pages) Hitachi Semiconductor – 140 MHz, 0 to 85°C Operation 3.3-V Phase-lock Loop Clock Driver

HD74CDCF2509B
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Conditions
Supply voltage
Input voltage ^*1
Output voltage ^{*1, 2}
V_CC
–0.5 to 4.6
V
V_I
–0.5 to 6.5
V
V_O
–0.5 to V_CC +0.5
V
Input clamp current
I_IK
–50
mA
V_I < 0
Output clamp current
I_OK
±50
mA
V_O < 0 or V_O > V_CC
Continuous output current
I_O
±50
mA
V_O = 0 to V_CC
Supply current
I_CC or I_GND
±100
mA
Maximum power dissipation
at Ta = 55°C (in still air) ^*3
P_T
0.7
W
Storage temperature
T_stg
–65 to +150
°C
Notes: Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated under “recommended operating conditions” is not implied. Exposure to absolute maximum
rated conditions for extended periods may affect device reliability.
1. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings
are observed.
2. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board
trace length of 750 mils.
Recommended Operating Conditions
Item
Symbol Min
Typ
Max
Supply voltage
V_CC
3.0
—
3.6
Input voltage
V_IH
2.0
—
—
V_IL
—
—
0.8
V_I
0
—
V_CC
Output current
I_OH
—
—
–12
I_OL
—
—
12
Operating temperature
T_a
0
—
85
Note: Unused inputs must be held high or low to prevent them from floating.
Unit
V
V
mA
°C
Conditions
Rev.10.00 Apr 07, 2006 page 3 of 8