HD151TS303RP Datasheet, PDF (3/9 Pages) Renesas Technology Corp – Spread Spectrum Clock for EMI Solution

HD151TS303RP
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Conditions
Supply voltage
VDD
–0.5 to 4.6
V
Input voltage
Output voltage ^*1
V_I
–0.5 to 4.6
V
V_O
–0.5 to VDD+0.5
V
Input clamp current
I_IK
–50
mA
V_I < 0
Output clamp current
I_OK
–50
mA
V_O < 0
Continuous output current
I_O
±50
mA
V_O = 0 to VDD
Maximum power dissipation
0.7
W
at Ta = 55°C (in still air)
Storage temperature
T_stg
–65 to +150
°C
Notes: Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated under “recommended operating conditions” is not implied. Exposure to absolute maximum
rated conditions for extended periods may affect device reliability.
1. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings
are observed.
Recommended Operating Conditions
Item
Supply voltage
DC input signal voltage
High level input voltage
Low level input voltage
Operating temperature
Input clock duty cycle
Symbol
VDD
V_IH
V_IL
T_a
Min
3.135
–0.3
2.0
–0.3
0
45
Typ
Max
Unit
3.3
3.465
V
—
VDD+0.3
V
—
VDD+0.3
V
—
0.8
V
—
70
°C
50
55
%
Conditions
DC Electrical Characteristics
Item
Input low voltage
Input high voltage
Input current
Symbol Min
V_IL
—
V_IH
2.0
I_I
—
—
Input slew rate
Input capacitance
Operating current
1
C_I
—
—
Ta = 0 to 70°C, VDD = 3.3 V±5%
Typ
Max
Unit
Test Conditions
—
0.8
V
—
—
V
—
±10
µA V_I = 0 V or 3.465 V,
VDD = 3.465 V, XIN pin
—
±100
V_I = 0 V or 3.465 V,
VDD = 3.465 V,
SEL0, SEL1 pins
—
4
V / ns 20% – 80%
—
4
pF SEL0, SEL1
7
—
mA XIN = 24 MHz, C_L = 0 pF,
VDD = 3.3 V
DC Electrical Characteristics / Clock Output & SSC Clock Output
Item
Symbol
Min
Typ
Max
Output voltage
V_OH
3.1
—
—
Output current*¹
V_OL
—
—
50
I_OH
—
–40
—
I_OL
—
40
—
Note: 1. Parameters are target of design. Not 100% tested in production.
Ta = 0 to 70°C, VDD = 3.3 V±5%
Unit
Test Conditions
V
I_OH = –1 mA, VDD = 3.3 V
mV I_OL = 1 mA, VDD = 3.3 V
mA V_OH = 1.5 V
V_OL = 1.5 V
Rev.6.00 Apr 07, 2006 page 3 of 8