PD8827B_15 Datasheet, PDF (23/26 Pages) Renesas Technology Corp – 7500 PIXELS × 3 COLOR CCD LINEAR IMAGE SENSOR

μ PD8827B
NOTES OF HANDLING
1. MOUNTING OF THE PACKAGE
The application of an excessive load to the package may cause the package to warp or break, or cause chips to
come off internally. Particular care should be taken when mounting the package on the circuit board. Don’t have
any object come in contact with glass cap. You should not reform the lead frame. We recommend to use a IC-
inserter when you assemble to PCB.
Also, be care that any of the following can cause the package to crack or dust to be generated.
1. Applying heat to the external leads for an extended period of time with soldering iron.
2. Rapid cooling or heating
3. Applying repetitive bending stress to the external leads.
2. GLASS CAP
Don’t either touch glass cap surface by hand or have any object come in contact with glass cap surface. Care
should be taken to avoid mechanical or thermal shock because the glass cap is easily to damage. For dirt stuck
through electricity ionized air is recommended.
3. OPERATE AND STORAGE ENVIRONMENTS
Operate in clean environments. CCD image sensors are precise optical equipment that should not be subject to
mechanical shocks. Exposure to high temperatures or humidity will affect the characteristics. So avoid storage
or usage in such conditions.
Keep in a case to protect from dust and dirt. Dew condensation may occur on CCD image sensors when the
devices are transported from a low-temperature environment to a high-temperature environment. Avoid such
rapid temperature changes.
For more detail, refer to our document “Review of Quality and Reliability Handbook” (C12769E)
4. ELECTOROSTATIC BREAKDOWN
CCD image sensor is protected against static electricity, but destruction due to static electricity is something
detected. Before handling, be sure to take the following protective measures.
1. Ground the tools such as soldering iron, radio cutting pliers of or pincer.
2. Install a conductive mat or on the floor or working table to prevent the generation of static electricity.
3. Either handle bare handed or use non chargeable gloves, clothes or material.
4. Ionized air is recommended for discharge when handling CCD image sensor.
5. For the shipment of mounted substrates, use box treated for prevention of static charges.
6. Anyone who is handling CCD image sensors, mounting them on PCB or testing or inspecting PCBs on
which semiconductor devices have been mounted must wear anti-static bands such
as wrist straps and ankle straps which are grounded via a series resistance connection of about
1MΩ.
Data Sheet S20022EJ1V1DS
21