H8S-2357 Datasheet, PDF (203/1047 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcomputer H8S Family H8S-2100 Series

Bit 4—Data Transfer Direction (DTDIR): Used in combination with the SAE bit in DMABCR to specify the data
transfer direction (source or destination). The function of this bit is therefore different in dual address mode and single
address mode.
DMABCR Bit 4
SAE
DTDIR
0
0
1
1
0
1
Description
Transfer with MAR as source address and IOAR as destination
address
(Initial value)
Transfer with IOAR as source address and MAR as destination address
Transfer with MAR as source address and DACK pin as write strobe
Transfer with DACK pin as read strobe and MAR as destination address
Bits 3 to 0—Data Transfer Factor (DTF3 to DTF0): These bits select the data transfer factor (activation source). There
are some differences in activation sources for channel A and for channel B.
Channel A
Bit 3
DTF3
0
1
Bit 2
DTF2
0
1
0
1
Bit 1
DTF1
0
1
0
1
0
1
0
1
Bit 0
DTF0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Description
—
(Initial value)
Activated by A/D converter conversion end interrupt
—
—
Activated by SCI channel 0 transmission data empty
interrupt
Activated by SCI channel 0 reception data full interrupt
Activated by SCI channel 1 transmission data empty
interrupt
Activated by SCI channel 1 reception data full interrupt
Activated by TPU channel 0 compare match/input capture
A interrupt
Activated by TPU channel 1 compare match/input capture
A interrupt
Activated by TPU channel 2 compare match/input capture
A interrupt
Activated by TPU channel 3 compare match/input capture
A interrupt
Activated by TPU channel 4 compare match/input capture
A interrupt
Activated by TPU channel 5 compare match/input capture
A interrupt
—
—
Rev.6.00 Oct.28.2004 page 175 of 1016
REJ09B0138-0600H