BCR4CM-16LH_15 Datasheet, PDF (2/9 Pages) Renesas Technology Corp – 800V - 4A - Triac Medium Power Use

BCR4CM-16LH
Preliminary
Electrical Characteristics
BCR4CM-16LH-1
BCR4CM-16LH
Parameter
Symbol
(I_GT item: 1)
Unit Test conditions
Min. Typ. Max. Min. Typ. Max.
Repetitive peak off-state current I_DRM —
— 2.0 —
— 2.0 mA Tj = 150C
V_DRM applied
On-state voltage
V_TM
—
— 1.6 —
— 1.6 V Tc = 25C, ITM = 6 A
instantaneous
measurement
Gate trigger voltage^Note2

V_FGT
—
— 1.5 —
— 1.5 V Tj = 25C, VD = 6 V

V_RGT
—
— 1.5
—
—
1.5
V ^RL ^{= 6 , R}G ^{= 330 }
Gate trigger curent^Note2
 V_{RGT} —
— 1.5
—
—
1.5 V

I_FGT
—
—
10
—
—
35 mA Tj = 25C, VD = 6 V

I_RGT
—
—
10
—
—
35 mA ^{RL = 6 , RG = 330 }
 I_{RGT}
—
—
10
—
—
35 mA
Gate non-trigger voltage
V_GD
0.2
—
—
0.2
—
—
V Tj = 125C
V_D = 1/2 V_DRM
0.1 —
— 0.1 —
—
V Tj = 150C
Thermal resistance
V_D = 1/2 V_DRM
R_{th (j-c)}
—
— 3.3
—
—
3.3 C/W ^{Junction to caseNote3,4}
Critical-rate of decay of on-state (di/dt)c 2.5 —
—
—
—
— A/ms Tj = 125C
commutating current ^Note5
(dv/dt)c < 10 V/s
—
—
— 3.0
—
— A/ms Tj = 125C
(dv/dt)c < 100 V/s
Notes: 1. Gate open.
2. Measurement using the gate trigger characteristics measurement circuit.
3. Case temperature is measured at the T₂ tab 1.5 mm apart from the molded case.
4. The contact thermal resistance R_{th (c-f)} in case of greasing is 1.0C/W.
5. Test conditions of the critical-rate of decay of on-state commutation current are shown in the table below.
Test conditions
1. Junction temperature
Tj = 125C
2. Peak off-state voltage
V_D = 400 V
2. Rate of rise of off-state commutating voltage
(dv/dt)c < 10 V/s (I_GT item : 1)
(dv/dt)c < 100 V/s
Commutating voltage and current waveforms
(inductive load)
Supply Voltage
Time
Main Current
Main Voltage
(dv/dt)c
(di/dt)c
Time
Time
V_D
R07DS0255EJ0200 Rev.2.00
Feb 25, 2013
Page 2 of 8