|
PD62A_15 Datasheet, PDF (15/64 Pages) Renesas Technology Corp – 4-BIT SINGLE-CHIP MICROCONTROLLER FOR INFRARED REMOTE CONTROL TRANSMISSION | |||
|
◁ |
µPD62A
2.9.2 Carry flag (CY)
The carry flag is set (to 1) in the following cases:
⢠If the ANL instruction or the XRL instruction is executed when bit 3 of the accumulator is â1â and bit 3 of the
operand is â1â.
⢠If the RL instruction or the RLZ instruction is executed when bit 3 of the accumulator is â1â.
⢠If the INC instruction or the SCAF instruction is executed when the value of the accumulator is 0FH.
The carry flag is cleared (to 0) in the following cases:
⢠If the ANL instruction or the XRL instruction is executed when at least either bit 3 of the accumulator or bit
3 of the operand is â0â.
⢠If the RL instruction or the RLZ instruction is executed when bit 3 of the accumulator is â0â.
⢠If the INC instruction or the SCAF instruction is executed when the value of the accumulator is other than 0FH.
⢠If the ORL instruction is executed.
⢠When data is written to the accumulator by the MOV instruction or the IN instruction.
Data Sheet U14474EJ2V0DS00
13
|
▷ |