R1EX24032ASAS0A Datasheet, PDF (14/24 Pages) Renesas Technology Corp – Two-wire serial interface 32k EEPROM (4-kword × 8-bit)

R1EX24032AxxS0A
Write Operations(WP=High)
Byte Write: (Write operation during WP=High status)
A write operation requires an 8-bit device address word with R/W = “0”. Then the EEPROM sends
acknowledgment "0" at the ninth clock cycle. After these, the 32kbit EEPROM receives 2 sequence 8-bit
memory address words.
Upon receipt of this memory address, the EEPROM outputs acknowledgment "0". After receipt of 8-bit
write data, the EEPROM outputs acknowledgment "1"(NO ACK). Then the EEPROM write operations
are not allowed.
Byte Write Operation
WP
32k
Start
Device
address
1010
1st Memory
address (n)
W
ACK
R/W
Note: 1. Don't care bit
2nd Memory
address (n)
Write data (n) ^{No ACK}
ACK
ACK
Stop
REJ03C0345-0100 Rev.1.00 Apr. 21, 2008
Page 14 of 22