R1EV24004ASAS0I_15 Datasheet, PDF (11/17 Pages) Renesas Technology Corp – Two-wire serial interface 4k EEPROM (512-word  8-bit)

R1EV24004ASAS0I
Acknowledge Polling:
Acknowledge polling feature is used to show if the EEPROM is in a internally-timed write cycle or not. This feature is
initiated by the stop condition after inputting write data. This requires the 8-bit device address word following the start
condition during a internally-timed write cycle. Acknowledge polling will operate when the R/W code = “0”.
Acknowledgment “1” (no acknowledgment) shows the EEPROM is in a internally-timed write cycle and
acknowledgment “0” shows that the internally-timed write cycle has completed. See Write Cycle Polling using ACK.
Write Cycle Polling Using ACK
Send
write command
Send
stop condition
to initiate write cycle
Send
start condition
Send
device address word
with R/W = 0
ACK
returned
Yes
Next operation is
addressing the memory
Yes
Send
memory address
No
No
Send
start condition
Send
stop condition
Proceed write operation
Proceed random address
read operation
Send
stop condition
R10DS0123EJ0100 Rev.1.00
Apr. 08, 2013
Page 11 of 15