HD74HC259 Datasheet, PDF (1/10 Pages) Hitachi Semiconductor – 8-bit Addressable Latch

HD74HC259
8-bit Addressable Latch
REJ03D0603–0200
(Previous ADE-205-480)
Rev.2.00
Jan 31, 2006
Description
The HD74HC259 has a single data input (D), 8 latch outputs (Q₀-Q₇), 3 address inputs (A, B, and C), a common enable
input (E), and a common clear input. To operate this device as an addressable latch, data is held on the D input, and the
address of the latch into which the data is to be entered is held on the A, B and C inputs. When enable is taken low the
data flows through to the addressed output. The data is stored when enable transitions from low to high. All
unaddressed latches will remain unaffected. With enable in the high state the device is deselected, and all latches
remain in their previous state, unaffected by changes on the data or address inputs. To eliminate the possibility of
entering erroneous data into the latches, the enable should be held high (inactive) while the address lines are changing.
If enable is held high and clear is taken low all eight latches are cleared to a low state. If enable is low all latches except
the addressed latch will be cleared. The addressed latch will instead follow the D input, effectively implementing a 3-
to-8 line decoder.
Features
• High Speed Operation: t_pd (Data to Output) = 16 ns typ (C_L = 50 pF)
• High Output Current: Fanout of 10 LSTTL Loads
• Wide Operating Voltage: V_CC = 2 to 6 V
• Low Input Current: 1 µA max
• Low Quiescent Supply Current: I_CC (static) = 4 µA max (Ta = 25°C)
• Ordering Information
Part Name
Package Type
Package Code
(Previous Code)
Package
Abbreviation
HD74HC259P
DILP-16 pin
PRDP0016AE-B _P
(DP-16FV)
HD74HC259FPEL SOP-16 pin (JEITA)
PRSP0016DH-B
(FP-16DAV)
FP
HD74HC259RPEL SOP-16 pin (JEDEC)
PRSP0016DG-A
(FP-16DNV)
RP
Note: Please consult the sales office for the above package availability.
Taping Abbreviation
(Quantity)
—
EL (2,000 pcs/reel)
EL (2,500 pcs/reel)
Rev.2.00 Jan 31, 2006 page 1 of 9