ZCG0060C Datasheet, PDF (2/4 Pages) Red Lion Controls. Inc – MODEL ZCG - SINGLE CHANNEL OUTPUT ROTARY PULSE GENERATOR

ZFG DIMENSIONS
In inches (mm)
1.20
(30.5)
0.04
(1.0)
0.75
(19.0)
1.65
(41.9)
0.08 (2.03)
MAX.
EQUIVALENT CIRCUIT & CONNECTIONS
LED
REGU-
LATOR
RED
8 to 35 VDC @ 50mA max.
This is the side view of the
Model ZFG. All other
dimensions (including the
handle tube) are the same
as the Model ZGG. See
below.
ZGG DIMENSIONS In inches (mm)
2.75 (69.9)
3.38
(85.8)
2.00
(50.8)
.04
(1.0)
4.00 (101.6)
1.65 (41.9)
.08
(2.03)
MAX.
.75
(19.0)
TYP. 2
USABLE SHAFT
LENGTH
1.08 (27.4)
REF., TYP. 2
.022 (.56)
TYP. 2
0.375 (9.52)
DIA. SHAFT
.13 (3.3)
2.06
(52.3)
2.00 (50.8) DIA.
2.75
(69.8)
.75 (19) DIA.
ELECTRICAL SPECIFICATIONS
1. SUPPLY VOLTAGE: +8 to +35 VDC (including power supply ripple) @ 50
mA max. (30 mA typ.); Reverse polarity protected.
2. OUTPUTS: NPN Open Collector Transistor;
V_OH = 30 VDC max., V_OL = 1 V max. @ 40 mA
Output current is limited to 40 mA.
3. OUTPUT FREQUENCY: Up to 10 KHz
4. CABLE CONNECTIONS:
RED = +VDC; BLACK = Common; WHITE = NPN O.C. Output.
MECHANICAL SPECIFICATIONS
1. MAXIMUM MECHANICAL SPEED: 6000 RPM
2. RADIAL SHAFT LOAD: 15 lbs. max. (66.7N)
3. AXIAL SHAFT LOAD: 15 lbs. max. (66.7N)
4. STARTING TORQUE: 3 oz.-in. (21.2N-mm)
5. MOMENT OF INERTIA:
Single Shaft = 2.82 x 10^-4 oz. - in. - sec.² (1.99 x 10^-3N - mm - sec²)
Dual Shaft = 3.09 x 10^-4 oz. - in. - sec.² (2.19 x 10^-3N - mm - sec²)
6. OPERATING TEMPERATURE: -18°C to +60°C
7. WEIGHT (LESS CABLE):
Rotary Pulse Generator = 15 oz (0.42 Kg)
Length Sensors = 22 oz (0.62 Kg)
WAVE OUTPUT DIAGRAM
Square wave output for models
with PPR 1, 10, 12, 20, 60 and
100. Square wave, 50/50 duty
cycle ±10%.
Models that use 1/3 yd. or 1/3 mtr
wheels with internal ÷ 3 circuits.
66/33 duty cycle.
Models with 120 and 200 PPR
utilize internal doubling. (50 μsec
±20% neg. going pulse.)
METAL
ETCHED
OPTICAL
DISC
WHT
BLK
PHOTOLOGIC DETECTOR
AND PULSE SHAPING CIRCUIT
BARE STRANDED SHIELD WIRE
CONNECTED TO INSTRUMENT
COMMON FOR INCREASED
NOISE IMMUNITY
OUTPUT:
V_OH = 30 VDC max.
V_OL = 1V max. @ 40mA
COMMON
ORDERING INFORMATION
MODEL NO.
DESCRIPTION
PPR
OUTPUT
PULSE RATE
CODE
PART NUMBER
1
ZCG0001C
10
ZCG0010C
ZCG
12
Rotary Pulse Generator
(Replaces RPGC)
60
100
ZCG0012C
ZCG0060C
ZCG0100C
*120
ZCG0120C
*200
ZCG0200C
1
1/Foot
ZFG0001C
10
10/Foot
ZFG0010C
12
1/inch
ZFG0012C
20 60/Mt or Yd ZFG0020C
ZFG
Length Sensor
Single Shaft
(Replaces LSCS)
60
100
*120
60/Foot
100/Foot
10/Inch
ZFG0060C
ZFG0100C
ZFG0120C
*200 600/Mt or Yd ZFG0200C
.333 1/Mt or Yd
ZFG00/3C
3.333 10/Mt or Yd ZFG03/3C
33.333 100/Mt or Yd ZFG33/3C
1
1/Foot
ZGG0001C
10
10/Foot
ZGG0010C
12
1/inch
ZGG0012C
20 60/Mt or Yd ZGG0020C
ZGG
Length Sensor
Double Shaft
(Replaces LSCD)
60
100
*120
60/Foot
100/Foot
10/Inch
ZGG0060C
ZGG0100C
ZGG0120C
*200 600/Mt or Yd ZGG0200C
.333 1/Mt or Yd ZGG00/3C
3.333 10/Mt or Yd ZGG03/3C
33.333 100/Mt or Yd ZGG33/3C
Flexible Coupling (1" Length) 0.250" - 0.375"
RPGFC002
Flexible Coupling (1" Length) 0.375" - 0.375"
RPGFC
Flexible Coupling (1" Length) 0.375" - 0.500"
RPGFC003
RPGFC004
Flexible Coupling (1" Length) 0.375" - 6 mm
RPGFC006
* Rotary pulse generators and length sensors with 120 & 200 PPR outputs employ
an internal doubling circuit and deliver a fixed 50 μsec ±20% output pulse at the
leading and trailing edge of a passing slot. Additional doubling in external
indicators or circuits may not be applicable. These outputs are derated to 7300
Hz due to internal x2 circuitry. (See Wave Output Diagram)
Notes:
1. For 25 foot cable, replace the last character of the part number (“C”) with “D”.
For 50 foot cable, replace the last character of the part number (“C”) with “E”.
2. Wheels and mounting brackets are sold separately, see Length Sensor Accessories.
2