RACD12-LP Datasheet, PDF (3/4 Pages) Recom International Power – Terminal Block Input/Output with Cable Clamps

AC/DC Converter
Specifications (measured @ ta= 25°C, 240VAC and rated load)
EMI Compliance
Equipment for general Lighting Purpose - EMC Immunity Requirements
Limits and methods of measurement of radio disturbance characteristics of electrical
lighting and similar equipment
Assessment of lighting equipment related to human exposure to electromagnetic fields
ESD Electrostatic discharge immunity test
Radiated, radio-frequency, electromagnetic field immunity test
Fast Transient and Burst Immunity
Surge Immunity
Immunity to conducted disturbances, induced by radio-frequency fields
Voltage Dips and Interuptions
Limits of Harmonic Current Emissions
Voltage Fluctuations and Flicker in Public Low-Voltage Systems <=16A per phase
RACD12-LP
Series
305984
+
305985
±8kV Air Discharge,
±4kV Contact Discharge
3V/m
±0.5kV (DC Output)
±1kV (AC Input)
±0.5kV (AC Input)
3V
95% reduction
30% reduction
Standard / Criterion
EN61547, 2009
EN55015, 2015
EN61493, 2015
EN61000-4-2, 2009, Criteria B
EN61000-4-3, 2010, Criteria A
EN61000-4-4, 2012, Criteria B
EN61000-4-5, 2014, Criteria C
EN61000-4-6, 2014, Criteria A
EN61000-4-11, 2014, Criteria B
EN61000-4-11, 2014, Criteria C
EN61000-3-2, Class C, 2014
EN61000-3-3, 2013
DIMENSION and PHYSICAL CHARACTERISTICS
Parameter
Type
Material
Case
Package Dimension (LxWxH)
Package Weight
Mechanical Dimensions
Value
Plastic (UL94V-2)
128.0 x 50.0 x 13.0mm
70g
tc
52.0
1
3
wire preparation
2
4
M3 Screws
6-7mm
FC 115.0
128.0
50.0
2 mounting screws are included
Connection via Screw Terminal
# Function Solid Wire Stranded Wire ⁽²⁾ AWG
1 VAC in (N) 0.75-1.5mm² 0.75-1.5mm² 20-16
2 VAC in (L) 0.75-1.5mm² 0.75-1.5mm² 20-16
3 LED+ 0.5-1.5mm²
0.5-1.5mm² 21-16
4 LED- 0.5-1.5mm²
0.5-1.5mm² 21-16
Notes:
Note2: The use of sleeve or ferrule terminations is recommended.
wire stripping length: 6-7mm
recommended tightening torque: 0.25Nm
tc= case temperature measuring point
FC= fixing centers
NC= no connection
Tolerance: xx.x= ±0.5mm
xx.xx= ±0.35mm
www.recom-power.com
REV.: 0/2016
L-3