RP100-481.8S Datasheet, PDF (2/6 Pages) Recom International Power – 100 Watt Isolated Single & Dual Output

INNOLINE
DC/DC-Converter
RP100-S_DI
Series
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
Over-Voltage Lockout Start-up Voltage
Over-Voltage Lockout Shuntdown Voltage
Unde-Voltage Lockout Start-up Voltage
Unde-Voltage Lockout Shuntdown Voltage
Input Filter (Note 3)
Input voltage variation
36-75VDC
Dual
Dual
Single
Dual
Single
Dual
dv/dt
Input Surge Voltage 100mS max
Single
Start up time
Nominal Vin and constant resistive load Single
Input Reflected-Ripple Current
(5Hz to 20Hz, 12uH Source inpedance)
Remote ON/OFF (Note 4)
Single (Positive logic)
Single (Negative logic)
Dual (Positive logic)
Dual (Negative logic)
Single
ON=Open or 3.5V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.5V < Vr < 15V,
ON=Open or 3.5V < Vr < +Vin,
OFF=Short or Vr < 1.2V,
ON=Short or 3.5V < Vr < +Vin,
OFF=Open or Vr < 1.2V.
Continuous Output Power
Output Voltage Accuracy (Full load and nominal Vin)
Output Voltage Adjustment (Note 1)
Single
Dual
Single
Dual
Minimum Load
Line Regulation
Load Regulation
LL to HL at FL
Single 0% to 100% FL
Dual 0% to 100% FL
Dual for each Outputs
Remote Sense (Note 1)
Ripple and Noise 20MHz bandwidth (Note 2)
Temperature Coefficient
Transient Response Recovery Time (25% load step change)
Over Voltage Protection threshold (Hiccup)
Single & Dual
2.5V
3.3V
5V
Over Current Protection threshold
Short Circuit Protection
Efficiency (at nominal input voltage, full load)
48V nom.
76.5V typ.
78.5V typ.
34V typ.
35V typ.
32V typ.
33V typ.
L-C type
5V/ms max
(Complies with ETS300 132 part4.4)
100VDC
25mS typ.
20mAp-p
I_IN=50µA max.
I_IN=1mA max.
I_IN=1mA max.
I_IN=50µA max.
100W max.
±1.5%
±1.0%
+10%, -20%
±10%
0%
See table
See table
10% of Vout
100mVp-p
±0.02%/ºC
200us
115% ~ 130% of Vout
3.0V
3.9V
6.2V
110% ~ 140% of Iout Rated
Hiccup, Automatic recovery
up to 90%
Continued next page
150
April-2005
www.recom-international.com